Thông tư 04/2009/TT-BKH

Circular No. 04/2009/TT-BKH of July 23, 2009, guiding the implementation of some provisions on import tax and value-added tax

Circular No. 04/2009/TT-BKH of July 23, 2009, guiding the implementation of some đã được thay thế bởi Circular No. 04/2012/TT-BKH promulgating a list of equipment, machinery spare và được áp dụng kể từ ngày 01/10/2012.

Nội dung toàn văn Circular No. 04/2009/TT-BKH of July 23, 2009, guiding the implementation of some

THE MINISTER OF PLANNING AND INVESTMENT -------	SOCIALIST REPUBLIC OF VIET NAM Independence - Freedom – Happiness ---------
No. 04/2009/TT-BKH	Hanoi, July 23, 2009

CIRCULAR

GUIDING THE IMPLEMENTATION OF SOME PROVISIONS ON IMPORT TAX AND VALUE-ADDED TAX

Pursuant to Decree No. 116/2008/ND-CP of November 14, 2008, defining the functions and tasks of the Ministry1 of Planning and Investment;

Pursuant to Decree No. I23/2008/ND-CP of December 8, 2008, detailing the implementation of Value-Added Tax Law No. 13/2008/QH12;

Pursuant to Decree No. 149/2005/ND-CP of December 8, 2005, detailing the implementation of Import Tax and Export Tax Law No. 45/2006/QH12

At the proposal of the director of the Industrial Economics Department;

The Ministry of Planning and Investment promulgates a number of lists of machinery, equipment, spare parts, special-use vehicles, raw materials, supplies and semi-finished products which can be produced at home as follows:

Article 1. To issue together with this Circular:

1. A list of equipment, machinery, spare parts and special-use vehicles (including airplanes, drilling platforms and ships) which can be produced at home prescribed in Clause 8, Article 3 of Decree No. 123/2008/ND-CP December 8, 2008, for use as a basis for value-added tax exemption under Clause 17, Article 5 of the Law on Value-Added Tax:

This list is also used as a basis for import tax exemption under Clause 14, Article 16 of Decree No. 149/2005/ND-CP of December 8, 2005, detailing the implementation of the Law on Import Tax and Export Tax with regard to importation 23 for scientific research and technological development.

2. A list of construction materials which can be produced at home for use as a basis for import tax exemption under Point e. Clause 6. Article 16 of Decree No. 149/2005/ND-CP of December 8, 2005, detailing the implementation of the Law on Import Tax and Export Tax.

3. A list of supplies necessary for petroleum activities which can be produced at home for use as a basis for import tax exemption under Point b. Clause 11, Article 16 of Decree No. 149/2005/ ND-CP of December 8, 2005, detailing the implementation of the Law on Import Tax and Export Tax and value-added tax exemption under Clause 17, Article 5 of the Law on Value-Added Tax.

4. A list of shipbuilding raw materials, supplies and semi-finished products which can be produced at home for use as a basis for import tax exemption under Clause 12, Article 16 of Decree No. 149/2005/ND-CP of December 8, 2005, detailing the implementation of the Law on Import Tax and Export Tax.

5. A list of raw materials and supplies in direct service of software manufacture which can be produced at home for use as a basis for import tax exemption under Clause 13, Article 16 of Decree No. 149/2005/ND-CP of December 8, 2005, detailing the implementation of the Law on Import Tax and Export Tax.

6. A list of raw materials, supplies and semi-finished products which can be produced at home for use a basis for import tax exemption under Clause 16, Article 16 of Decree No. 149/2005/ND-CP of December 8, 2005, detailing the implementation of the Law on Import Tax and Export Tax.

This list is also used as a basis for import tax exemption under Clause 14, Article 16 of Decree No. 149/2005/ND-CP of December 8, 2005, detailing the implementation of the Law on Import Tax and Export Tax with regard to importation of supplies for scientific research and technological development.

Article 2. In the course of using these lists, if customs offices hold opinions different from those of enterprises, they shall coordinate with provincial-level Planning and Investment Departments in considering and settling the cases. If the cases cannot be completely settled, the General Department of Customs shall propose the Ministry of Planning and Investment to consider and decide on the cases or to amend or supplement these lists.

Article 3. The lists issued together with this Circular will be supplemented so as to suit the practical situation at the request of specialized state management agencies.

Article 4. This Circular replaces the Minister of Planning and Investment's Decision No. 827/2006/QD-BKH of August 15, 2006, and takes effect 15 days after its publication in "CONG BAO."-

FOR THE MINISTER OF
PLANNING AND INVESTMENT
DEPUTY MINISTER

Truong Van Doan

LIST

OF EQUIPMENT, MACHINERY, REPLACEMENT ACCESSORIES AND SPECIALIZED TRANSPORT VEHICLES IN THE CATEGORY OF ABLE TO BE PRODUCED DOMESTICALLY
(Issued with Circular 04-2009-TT-BKH of the Ministry of Planning and Investment dated 23 July 2009)

No.	Name of goods	Code in the import tariff list				Symbols of specifications, description of technical features
No.	Name of goods	Heading	Sub-heading
1	Plastic prepaid cards	3926	90	99		For prepaid mobile phones
2	Conveyor belts of all kinds	4010				2.150 mm wide and 100 m long
3	Surgical gloves	4015	11	00	00
4	Paper prepaid cards	4502	69	90		For prepaid mobile phones
5	Veils of all kinds	6214
6	Helmets of all kinds	6406	10	90
7	Pressure tubes, valve openers, elbows [crooks] after turbine	7304	31			Of steel, used for hydroelectricity, of a thickness of between 8 and 40 mm, pressure of 15 at or more
8	Straight connectors of non-flange	7307	29	00	00	3-1/8"; 1-5/8"
9	Converters of non-flange into flange	7307	29	00	00	3-1/8"; 1-5/8"
10	Converters of non-flange 1-5/8" into flange 3-1/8"	7307	29	00	00
11	Converters of non-flange 3-1/8" into flange 4-1/2"	7307	29	00	00
12	Converters of flange 1-5/8" into flange 7/8"	7307	29	00	00
13	Converters of flange 3-1/8" into flange 1-5/8"	7307	29	00	00
14	Converters of flange 4-1/2" into flange 3-1/8"	7307	29	00	00
15	Flanged fitting EIA	7307	29	00	00	7/8" used for foam cables 1/2"; 7/8" used for foam cables 7/8"; 1-5/8" used for foam cables 1-5/8"; 3-1/8" used for hollow cables 3-1/8"
16	90° elbows	7307	29	00	00	Flange 1-5/8"; 3-1/8"; non-flange 1-5/8"; 3-1/8"
17	High-voltage lighting pillars of steel coated hot zinc	7308	20	21	00	For the grid of up to 500kV
18	All kinds of metallic scaffolds, support pillars and shuttering	7308	40	90		Of common type
19	Antenna pillars	7308	90	90	00	Stay cables of a triangle cross-section of 330 with a height of 21-45 m; stay cables of a triangle cross-section of 660 with a height of 36-66 m; stay cables of a triangle cross-section of 800 with a height of 60-100 m; stay cables of a circle cross-section with a height of 15 m; mobile cable ties - of a height of 10 m
20	Tanks	7309	00	00		Of a capacity of up to 4,000 nf, with a diameter of up to 57.5 m
21	Pressure tanks and tanks for compressed gas	7309	00	00		Up to 1,000 nf, working pressure of up to 100 at; with the multiplication product PV of less than 4,000
		7311	00	11
		7311	00	12	00	Of a capacity of 26.2 - 108 litres
22	Spiral screws	7318
23	Aluminium alloy canoe covers	7616	99	90
24	Iron cabinets	8302	50	00		Of a type with two doors, four doors and eight partitions
25	Iron stands	8302	50	00
26	Boilers of all kinds	8402	12	21		Of an output of up to 25 tons/h, a pressure of up to 12 kG/cm2, a working pressure of up to 30 at (fuel: coal, gas, oil, bagasse)
27	Systems of dealing with smoke from boilers	8404	10			Of an output of 3,500kg/h; smoke and dust cleaning chambers of water film type
28	Internal combustion engines	8408	20			Of an output of up to 50 HP, diesel type
29	Ship axis and propeller (cast bronze)	8410	90	00		Propeller of a diameter of up to 2 m
30	Irrigation water pumps	8413	81	10		Up to Q = 32,000 mJ/h, H = 30 - 40 m
31	Air compressors	8414	40	00		Up to 32 at, 18mJ/h
32	Industrial fans	8414	51			Up to 100,000 mJ/h
		8414	59
		8414	80	19		Of an air flow of 54 mJ/h, an impeller diameter of 1.3 m, an output of 1.5 HP, a noise level of under 78.5 dBA, an air humidity of under 80%, for industrial ventilation and waterproof function
33	Air ventilator and cooling equipments using pipes	8415	83	90	10	Cooling area of 120m2; an propeller diameter of 618 mm; an engine power of 1.1 kW; water basin capacity of 25 litres; size of 985 x 985 x 1,070; weight of 98 kg
34	Cyclones and furnaces of all kinds	8416				Up to 3.5 nrVh, a furnace's diameter of up to 5 m, a corrugated iron thickness of up to 50 mm
35	Equipment for production of baked bricks of all kinds	8416				Of an output of up to 20 million bricks/year
36	Incinerators for medical waste	8417	80	00	00	Of an output of 3kg/h; fuel: LPG, fuel consumption of 2.5kg/h, use of 100 litres of water per hour; incineration frequency: 2 times; temperature of primary incineration chamber: 300-900°C, temperature of secondary incineration chamber: 900-1,1000°C; voltage: 220V, single phase 50Hz, power of 1,000w, materials in incineration chamber: fire bricks, heat-isolated materials: mineral fibre + rockwool; materials used in the incinerator's body and fans: stainless steel, used premises: 3x2.5x3m; exhaust fumes satisfying TCVN 5939-1995
37	Equipment for production of pure ice	8418	50	90		Parameters of big machines: ice cube size of 48 x 80 mm, an output of 9-10 tons/24hr or 400 kg/batch, power consumption level of 0.085 kwh/kg of ice, the compressor's output of 50 HP
38	Refrigerating chambers (ashore)	8418	50	90		Joined with Polyurethane panels, insulated, two sides covered with plastic-coated iron sheets, refrigerating chambers are of a height of up to 10 m and capacity of up to 20,000 m3
39	Flake ice-makers	8418	69	50
40	Sterilizing autoclaves	8419	20	00		Of types of 20, 52 and 75 litres
41	Cabinet dryers	8419	39	19		Of types of between 30 and 200 litres
42	Rotary dryers of all kinds	8419	39			Of an output of up to 1 ton/hr
43	Pastry dryers	8419				Of a productivity of 15 kg/hr, entry humidity of 50% and exit humidity of 14%, electric power of 20 kw, adjustable drying temperature, size of 1 x 1, 3 x 1.5 m, tole-made covering
44	Fluid bed dryer granulators	8419	39	19	00	Used in production lines of medicine for cattle, of an output of 40-100 kg/h, volume of dryer: 400 litres, heat power: 45kw, drying temperature: 70-80°C
45	Spray dryers	8419	39	19		Of a power of 2 litres/g, intake air temperature of 180-350°C, outtake air temperature of 40-80°C, power of 12kw, with variable spraying speed control
46	Block brick-pressers	8420	10	90		Up to 600 bricks/h, 13kW
47	Sleeve-type dust filters	8421	39			Of all kinds
48	Sluice-gate closing and -opening machines, operated by electric motor	8425	11	00		Of a lifting capacity of up to 100 tons
49	Sluice-gate opening and-closing machines, hand-operated	8425	19	00		Of a lifting capacity of up to 30 tons
50	Winches, operated by electric motor	8425	31	00		Of a lifting capacity of up to 50 tons
51	Winches of all kinds	8425	39	00		Of a lifting capacity of up to 10 tons
52	Hydraulic jacks for tunnel furnaces	8425	42			Of a thrust of up to 60 tons, a stroke of 1.6 m
53	Derricks on river ships and coastal ships of all kinds	8426	11	00		Of a lifting capacity of up to 15 tons, a reach of 18 m
54	Gantry cranes	8426	19	10	00	Of a lifting capacity of up to 300 tons, a reach of 80 m
55	Bridge cranes	8426	19	10		Of one-beam type (of a lifting capacity of up to 10 tons, a span of up to 25 m) Of two-beam type (of a lifting capacity of up to 90 tons, a span of up to 34 m) Of tower type (of a lifting capacity of up to 20 tons, a reach of up to 25 m)
56	Elevators	8428	90	90		Of a lifting capacity of up to 500 kg - an output of 3 kW
57	Conveyor screws of all kinds	8428	90	90	00	Of a diameter of up to 600 mm and a length of 30 m
58	Lifts	8428	10	10		For carrying humans (of a load of up to 2 tons and a speed of up to 1.5m/s) For carrying goods (of a load of up to 5 tons and a speed of up 1.5 m/s)
59	Machines for plastic product collection using the vertical direction	8428	90	90
60	Skip hoists	8428	10	90		Of a capacity of up to 60 mJ/h
61	Conveyor buckets of all kinds	8428	32			Of a capacity of up to 160 nf/h, a height of 105 m
62	Wagons of tunnel furnaces	8428	39	90
63	Tyre-wheel static rollers	8429	90	90		Of a weight of between 10 tons and 12 tons
64	Steel-wheel static rollers	8429	90	90		Of a weight of between 6 tons and 12 tons
65	Steel-wheel vibratory rollers	8429	90	90		Of vibrating load of up to 10 tons
66	Equipment for driving cast-in-place concrete piles for construction works, including:
	Rock and soil drilling buckets	8431	41	00		: 600 - 2,200 mm
	Rock and soil scrapping buckets	8431	41	00		600 - 2,200 mm
	Concrete-placing tube sets	8431	43	00		: 219-273 mm, 80 m long
	Cleaning blow-tubes	8431	43	00		: 89 mm, 80 m long
67	Sugarcane-planting combined machines	8432	30	00		Making cuts and fertilizing before planting at a capacity of 0.2 ha/h, with more than 40,000 cuttings and a working width 1.4 m
68	Soil ploughs and rollers	8432	10	00	00
69	Combined harvesters and threshers	8433	51	00	00	Of an output of 4-5 ha per day, of a cutting width of 1.8m, moved by chains, of a weight of 2 tons, automatic cutting, threshing and packing of rice
70	Spreading rice harvesters	8433	51	00		Of a cutting width of 1.2 -1.5 m an output of up to 0.5 ha/h
71	Rice-threshers, with or without motor	8433	52	00		Of an output of up to 2.5 tons/h
72	Combined sugarcane harvesters	8433	59	90		Of a capacity of 0.3-0.5 ha/h, automatically cutting tops, roots and conveying back in rows
73	Milking machines	8434	10	10		Operated by single-phase motor of a power of 1.1 kW, a speed of 4,450 rounds/minute, double-pace type, and up to the food quality, hygiene and safety standard
74	Ostrich egg incubators	8436	21			AT-252, of a capacity of 252 eggs/batch
75	Fish feed pelletting machines	8436	80			Of a capacity of 1,500 kg/h, an output of 75 kW, a weight of 2,600 kg, and dimensions of 3,000 x 2,500 x 3,000 mm
76	Rice-husking machines	8437	80	10		Of a capacity of up to 6 tons/h
		8437	80	20
77	Rice-polishing machines of all kinds	8437	80	51		Of a capacity of up to 6 tons/h
78	Export rice-processing chains	8437	10			Of a capacity of up to 10 tons/h
79	Beer production chains	8438	40			Of a capacity of up to 10,000 litres/day
80	Fresh coffee grinders	8438	80	11	00
81	Dry coffee grinders	8438	80	11	00
82	Fish powder processing chains	8438	80	91		Of a capacity of up to 80 tons of raw materials/day
83	Pie filling extruders	8438	80	91		Of a capacity of 2,400 products/h, with a filling weight of 8-20 g (an error of 0.5 g)
84	Food production chains for raising abalone	8438	80	91	00	Grinder + fan + cyclone: 1x1x2 m, of an output of 2 kg/h, of a power of 5 kw; Mixer: 0.7x0.4x0.4 m, of an output of 2 kg/h, of a power of 1 Hp; Cutter: 0.6x1x1 m, of an output of 2 kg/h, of a power of 3 kw; Conveyor belt dryer: 0.6x2x1 m, of an output of 2 kg/h, of a power of 10 kw;
85	Walter cake moulds	8438	90	19	00	Of a size of 218x200 mm
86	Krap paper production chains	8439	20	00		Of a capacity of up to 1,000 - 10,000 tons/year
87	Votive paper production chains	8439	20	00		Of a capacity of up to 2,000 tons/year
88	Tissue paper production chains	8439	20	00		Of a capacity of up to 2,000 tons/year
89	Machines producing adiabatic cooling pads	8439	20	00	00	Materials: cellulose; angle between two adjoining pads: 45/45 (a total of 900); evaporating surface: approximately 460m2/m3; water flow: 60l/m2
90	Stamp-removing and postage-printing machines	8443	39
91	Offset printers, reel-fed printing	8443	11	00	00
92	Offset printers, sheet fed printing	8443	12	00	00	Of a kind used in offices (using paper of a size not exceeding 22 cm in one dimension and 36 cm in the other dimension)
93	Letterpress and reel-fed printers, excluding flexographic printers	8443	14	00	00
94	Letterpress printers, excluding reel-fed printers and flexographic printers	8443	15	00	00
95	Flexographic printers	8443	16	00	00
96	Gravure printers	8443	17	00	00
97	Printers - photocopiers, with inkjet printing technology	8443	31	10	00
98	Printers - photocopiers, with laser printing technology	8443	31	20	00
99	Combined printers, photocopiers and fax machines	8443	31	30	00
100	Dot matrix printers	8443	32	10	00
101	Inkjet printers	8443	32	20	00
102	Laser printers	8443	32	30	00
103	Fax machines	8443	32	40	00
104	Electrostatic photocopiers	8443	39	11	00
		8443	39	20	00
105	Other photocopiers incorporating an optical system	8443	39	30	00
106	Automatic thread cutters in industrial sewing machines	8445	90	19		Seam programming and automatic control of seaming needles
107	PP bag weaving machines	8447	90			MDB-4, of a capacity of 1.7-2 m/minute
108	Tubular knit fabric anti-folding machines	8448	59	00		AC-680, of a speed of 10-40 m/minute
109	Washing machines of all kinds	8450				Including kinds with automatic dryers
110	Parts of washing machines	8450	90
111	Toothed rough rolling machines	8455	10			Up to d = 800 mm, I = 400, 15 mJ/h
112	Plain rolling machines	8455	10			Up to d = 1,000 mm, I = 800, 20 mJ/h
113	Construction steel rolling chains	8455	21	00		Of a capacity of up to 30,000 tons/year
114	Corrugated iron sheet rolling chains	8455	22	00		Of a capacity of 15-20 HP, a weight of 8-12 tons, dimensions of 10 x 1.5 m, a rolling speed of 3-5 m/minute, and an iron sheet thickness of 0.34-0.6 mm
115	C and Z-shaped binding rafter rolling machines	8455	22	00		Of a capacity of 30 HP, a weight of 8.5 tons, dimensions of 8 x 8 m, a rolling speed of 12-15 m/minute, and an iron sheet thickness of 1.5-3 mm
116	Common-type multi-purpose lathes	8458	99	00		Of a diameter of up to 650 mm, a length of 3,000 mm
117	Rod drilling machines	8459	29			Drill's diameter of up to 40 mm, a stroke of 400 mm
118	Table drilling machines	8459	29			Of a diameter of up to 13 mm
119	Two-stone grinding machines	8460	90			Of a diameter of up to 400 mm
120	Common shaping machines	8461	20			Of a stroke of 650 mm
121	Rod sawing machines	8461	50
122	Pneumatic hammers	8462	10			Weighing up to 75 kg
123	Electronic calculators	8470	10	00	00	Capable of operation without an external source of electric power and pocket-size data recording, reproducing and displaying machines with calculating functions
124	Cash registers	8470	50	00	00
125	Optical disk drives	8471	70	40	00	Including CD-ROM drives, DVD drives and recordable CD drives (CD-R)
126	Bar code readers	8471	90	10	00
127	Document or image scanners	8471	90	20	00
128	Sand separators	8474	10			Of a capacity of 25 - 50 m3/h
129	Spiral screws	8474	10	10
130	Stone-grinding and -screening stations	8474	20			Of a capacity of up to 50 tons/h
131	Ball mills	8474	20			Of a capacity of up to 6 tons/h, number of rounds n = 29.2 rounds/minute Up to 8 tons/h, n = 23.9 rounds/minute Up to 14 tons/h, n = 21.4 rounds/minute (Input materials: 0-0.25 mm, output products: 0-0.074 mm)
132	Super-fine ball mills	8474	20			For crushing calcium carbonate, of a capacity of up to 2.5 tons/h, a fineness of d50to2 um, d97 to 10 urn
133	Jaw mills 400 x 600	8474	20			Upto10m3/h
134	Circle mills	8474	20			Up to d = 2,800, 40 kW
135	Concrete-mixing machines of free-drop type	8474	31			Up to 250 litres/batch, 5.2 kW
136	Concrete-mixing machines of coercive type	8474	31			Up to 500 litres/batch, 10 kW
137	Concrete-mixing stations	8474	31			Of a capacity of up to 80 mJ/h
138	Hot-asphalt concrete-mixing stations	8474	32			Of a capacity of up to 104 tons/h
139	Combined vacuum mixing-extruding machines	8474	39	10		Of a capacity of up to 12 nf/h, 130 kW
140	Two-axe mixers with screen filters	8474	39	10		Of a capacity of up to 20 mJ/h, 40 kW
141	Equipment for manufacturing centrifugal water pipes and reinforced concrete poles	8474	80	10		Up to 300 - 1,500 mm; 75 kW; 110 -220 kV
142	PEHD pipe production chains	8477	20	20		Producing PEHD, LD, PVC, PTE pipes, of a diameter of
143	Vulcanizers for shaping rubber belts	8477	40	10		Of C-class width, a length of up to 14 m, 15 belts per batch, moulding temperature of 150° C, hydraulic diameter of 360 mm, mould size of 20 x 36 inches, pressure of 150 kg/cm2, semi-automatic type
144	Machines for plastic product collection using the vertical direction	8477	90	20	00	Size: 1,750 mm long, 1,100 m wide; angle of rotation of the main arm: 90°, (horizontal location error: ± 0.1 mm, horizontal position repeating error: ± 0.1 mm
145	Equipment for feeding and -heat-drying materials for plastic presses	8477	90	39		Material feeder: Power source 220 V, single phase, 50 HZ, dimensions 540 x 410 x 360 mm, funnel capacity 6 litres,
						weight 11 kg, feeding capacity 300 kg/h. Dryer: Power source 380 V, three phases, 50 HZ, centrifugal blower 90W - 1,450 rounds/minute, weight 45 kg, useful capacity 25 kg. Supplying granular materials sized 1-3 mm
146	Rubber latex processing chains	8479				Of a capacity of up to 6 tons/h
147	NPK fertilizer production chains	8479				Of a capacity of 30,000 tons/year
148	Micro-biological fertilizer chains	8479				Of a capacity of 20 tons/h
149	Automatic machines for ceiling fan wire coiling	8479	81			Of a coiling speed of up to 2,000 rounds/minute, motor power of 2 x 0.5 HP, three phases, 220/380V, number of coiling grooves 12-30, micro-control type
150	Rotary grates of cement shaft furnaces	8479	89
151	Hydraulic gear box assemblies	8483	40	21		Fitted with diesel motor of up to 15 CV
152	Generators (ashore)	8501	61			Of an output not exceeding 75 kVA
153		8502	11	00		Of an output voltage of 220/240 V
154	Single-phase AC motors (not watertight)	8501				Of an output of up to 2.2 kW, asynchronous capacitor motor, short-circuit rotor
155	Three-phase AC motors (not watertight)	8501				Of an output of between 0.55 kW and 90 kW, asynchronous motor, short-circuit rotor of between 750 rounds/minute and 3,000 rounds/minute
156	Three-phase AC motors (not watertight)	8501				Of an output of between 90 kW and 1,000 kW, asynchronous motor, short-circuit rotor of 600 rounds/minute
157	DC power supply used in power module VHF/UHF	8504	40	19	00
158	DC-48V source system	8504	40	30		VITECO-ARGUS (10A - 600A)
159	Source system	8504	40	90		HRS 4500 SDPS 250
160	Independent source equipment	8504	40	90		DPS 4825 DPS 4850
161	DC source equipment	8504	40	90		HFCR-1600
162	Ballasts for fluorescent tubes	8504	10	00		220V - 50 Hz Of an output of between 20 and 40 W
163	Transformers	8504	21	99	00	Distribution and medium-voltage MBA, voltage of less than 66 kV, power of 10-650KVA
		8504	22	99	00	Distribution and medium-voltage MBA, voltage of less than 66 kV, power of 660-10,000KVA
		8504	23	21	00	MBA 110 KV, 16-20 MVA
		8504	23	29	00	MBA 110 KV, 25-63 MVA
		8504	23	29	00	MBA 220 KV, 125 MVA
		8504	23	21	00	MBA 220 KV, 250 MVA
164	6-35 KV voltage transformers	8504	31	10	10	Of a voltage of between 6 and 35 kV Current transformer ratio: 10-800/5A
165	One-phase voltage transformers (ashore)	8504	31	10	10	Of a voltage of between 6 and 35 kV, induction type
166	Three-phase voltage transformers (ashore)	8504	31	10	10	Of a voltage of between 6 and 15 kV, induction type
167	110-220 kv current transformers with insulator pedestals	8504	31	20	20
168	Low-voltage 380V and medium-voltage 35kV instrument transformers	8504	31			Primary, up to 2,000 A; secondary, 1A and5A
169	Medium-voltage instrument transformers	8504	32			Of a voltage of up to 35 kV
170	Gear boxes	8708	40			HS14, HS19, GT10, GT2, HDC
171	Miner's torches	8513	10	10		DM10A
172	Miner's torch-charging stands	8513	90	90		GN 16-32-48
		8513	90	20
173	Fluid bed dryer granulator	8514				Of an output of 40-100 kg/h, volume of dryer: 400 litres, heat power: 45kw, drying temperature: 70-80°C (for medical use)
174	Sound amplifiers of sirens	8518	50	00
175	Subscriber cards of electronic switchboards	8517				For postal sector
176	Wireless telephone handsets	8517	11	00	00
177	Public telephones	8517	18	10		V-820 type
178	VSAT switchboards	8517	61			DTS VSAT
179	Wire connection boxes	8517	70			HC, HD, HDTM-50, HPDR, jack batche
180	Connection boxes	8517	70			HCN 30, HCN 50
181	Subscriber security boxes	8517	70			DS391.GDT
182	Subscriber line connection boxes	8517	70			UD
183	Telephonic cable connection cabinets	8517	70			Of iron and composite (KP 300, TS, KP 300 PCS, KP-600-PCS, KP-1600, KP-600, KP-1200)
184	Subscriber security boxes	8517	70			DS301 GDT
185	Cable sleeves	8517	70			PMS 1-3 PMS 4-6
186	Optic fibre cable sleeves	8517	70			PMO-12/72FO
187	Post office boxes	8517	70
188	Manual direction finder (MDF) connection devices	8517	70			From 500 to 5,000 pairs
189	Data-link control (DLC) subscriber circuit devices	8517	70
190	Optic-fibre cable terminal	8517	70			STM-1.STM-4, STM-16
191	Modems V-ADSL	8517	70	10
192	DTS-4000-AN access switchboard system	8517	69	90
193	Devices to prevent illegal line connection	8517	69	90		P-line type
194	Sound wave generating equipment SA-6PE16	8517	70	99
195	MDF five-point security devices	8517	70	99		MDF S2000-PTC
196	MDF-connecting stands of P6000 type	8517	70	99		MDF P6000
197	GANIVO covers of communication cable holes	8517	70	99		Nhp003023023
198	Wire connection slates	8517	70	99		One pair with grease (BI-1), 10 pairs with grease (BI-10), line SL10, line PO-10 (IDC102), subscriber line (PO-IDF and PO-ID)
199	REF cable connectors	8517	70	99		UY2 UY-POSTEF
200	Optic transmission PDH Optimux(4E1)	8517	70	99
201	Data-link control devices	8517	70	99		POSTEF DK-2000
202	Micro	8518	10	11	00	Having a frequency range of between 300 Hz and 3,400 Hz, of a diameter not exceeding 10 mm and of a height of not exceeding 3 mm, for telecommunications use
203	Single loudspeakers, mounted in the same enclosure	8518	21	00	00
204	Multiple loudspeakers, mounted in the same enclosure	8518	22	00	00
205	Box speaker assemblies	8518	29	10	00
206	Loudspeakers, without housing	8518	29	20	00	Having a frequency range of 300 Hz to 3,400 Hz, with a diameter not exceeding 50 mm, for telecommunication use
207	Headphones	8518	30	10	00
208	Earphones	8518	30	20	00
209	Combined microphone/speaker sets:
	- Handsets for telephonic apparatus	8518	30	31	00
	- Line telephone handsets	8518	30	40	00
210	Audio-frequency electric amplifiers:	8518	40
211	Electric sound amplifier sets	8518	50	00
212	Parts of equipment	8518	90	10	00
		8518	90	20	00
213	Magnetized cards	8523	21			Entry/exit control cards
214	Discs for laser reading systems:	8523	40
215	Smart cards	8523	52	00	00
216	Transmitting equipment for the analogue television broadcasting service	8525	50	00	00	UHF semi-conducting video transmitters of a power of between 100w and 10 kw; VHF of a power of between 150w and 1 kw - combined configuration; UHF of a power of between 150w and 1 kw -combined configuration; portable transmitters of a power of between 5 and 30w; DVB - T Transmitters of a power of between 10 and 20w
		8525	50	00	00	Semi-conducting FM Stereo transmitters of a power of between 100w and 10 kw; Portable FM Stereo Transmitters of a power of between 10 and 20 w
		8525	50	00	00	Digital transmitters incorporating DVB camlink camera; Pocket DVB transmitters
217	Transmission apparatus incorporating reception apparatus	8525	60	00	00
218	Webcams	8525	80	10	00
219	Digital cameras and video camera recorders	8525	80	20	00
220	Video connection control units	8525	10	21		Wire and wireless type
221	Central control systems	8525	10	22
222	Remote control systems	8525	10	23
223	Television decoders and channel selectors	8525	10	40
224	Digital microwave equipment	8525	20	50		4x2,8x2, 16x2Mbit/s
225	Few-channel digital microwave equipment	8525	20	50		Between 1 and 6 channels
226	Digital radio relay systems	8525	20	50
227	Transmitters for radio telephony and telegraphy	8525	20	91		VHF/UHF 1GHz-14GHz
228	Microwave transmitters for television broadcasting	8525	20	92		VHF/UHF 1GHz-14GHz, analog/digital technology
229	Microwave transmitters for radio broadcasting	8525	20	99		VHF/UHF 1GHz-14GHz, analog/digital technology
230	Digital transmitters	8525	50	00	00	10w/15w/20w DVB - T Transmitter
231	Ground radars	8526	91	90
232	Radio remote control units	8526	92	00
233	Wireless radio receivers/with micros/with DC 12V	8527	13	90	00	Digital technology, encoding, remote control with a power of 50w (25w + 25w), amplification in two separate channels, inserting 8 channel decoding card DD-8
234	Cathode ray tube screens	8528	41
		8528	49
235	Other screens	8528	51
		8528	59
236	Specialized digital signal receivers	8528	71	10	00	Prof. DVB Receiver of a frequency range of between 470 and 1,000 Mhz/ 250-1,000 Mhz
237	Microwave antenna posts	8529				Of a height of up to 150 m
238	Antenna pillars	8529				Stay cables of a triangle cross-section of 330,660,800,1,200 mm
239	Antennas of all kinds for transmitters	8529	10			For radio and television broadcasting, radio telephony and telegraphy
240	Directional digital video broadcasting antenna systems	8529	10	92	00
241	Omni-directional digital video broadcasting antennas	8529	10	92	00
242	Mobile directional digital video receiving antennas	8529	10	92	00
243	Mobile omni-directional digital video receiving antennas	8529	10	92	00
244	Filters and UHF Band antenna amplifiers	8529	10	92	00
245	DC source supply and RF connectors	8529	10	92	00
246	Spare parts and accessories of transmitters	8529				For radio and television broadcasting: dividers, adders, filters, channel adders
247	Remote-control 8-channel encoders	8529	90	52	00
248	Power amplifiers	8529	90	59	90	60w/100w/120w/150w DVB Power Amplifier
249	Exciters	8529	90	99	00	VHF Eciter, UHF Eciter with analogue combined or separated sound and vision, 20 w (max)
250	Power module	8529	90	99	00	VHF of between 150w and 1.6 kw; UHF of between 150 and 2.4 kw; integrated DC power supply
251	Control units	8529	90	99	00	LCD 75x25mm and 16 , integrated power supply
252	Two-line RF signal dividers	8529	90	99	00	SMA-SMA fittings
253	Two-line RF power diplexers	8529	90	99	00	N-7/16 fittings; 7/16 -ElA7/8 fittings; EIA7/8 - EIAI - 5/8 fittings; EIAI - 5/8 -El A3- 1/8 fittings
254	Vision/sound diplexers 5-1 OkW	8529	90	99	00	UHF/VHF Vision/Sound Diplexer with Output Filter
255	VHF Band-Pass Filter/Notch Filter	8529	90	99	00	500 W fittings N; 1kW, 7/16 fittings; 2 kW, EIA 7/8 fittings
256	UHF Output Filter	8529	90	99	00	500 W fittings N; 1kW, 7/16 fittings; 2 kW, EIA 7/8" fittings
257	Liquid cooling systems, double pumping configuration	8529	90	99	00	Auxiliary equipment for video broadcasting machines comprising pump control cabinets, combined heat
						exchangers, safety control equipment, liquid pipeline systems, tanks and accessories
258	FM Stereo Exciter	8529	90	99	00	Output 20W, analogue
259	FM power amplifiers	8529	90	99	00	50W-300W
260	FM power amplifying module	8529	90	99	00	500W-1KW, integrated DC power supply
261	FM power amplifying module	8529	90	99	00	1.6kW, integrated DC power supply, cooling by wind, module of a plug and unplug kind
262	DC power supply used in FM power module	8529	90	99	00
263	Diplexers of channels of two FM broadcasting machines	8529	90	59	90	2kW + 2kW; 5kW + 5kW; 10kW + 10kW
264	Diplexers of channels of two VHF video broadcasting machines	8529	90	59	90	2kW + 2kW; 5kW + 5kW; 10kW + 10kW
265	VHF Band - I video broadcasting antennas	8529	10	92	00	Kind of antennas: 2-dipole, horizontal polarization, fittings N, 700W/fittings 7/16", 1.5kW/fittings EIA 7/8", 2.5kW; materials: stainless steel coated zinc, silver coated copper, teflon
266	VHF Band-Ill video broadcasting antennas	8529	10	92	00	Kind of antennas: 2-dipole, horizontal polarization, fittings N, 500W/fittings 7/16", 500W; materials: stainless steel coated zinc, silver coated copper, teflon
267	UHF Band-IV/Bank-V video broadcasting antennas	8529	10	92	00	Kind of antennas: 4-dipole, horizontal polarization, fittings N, 500W/fittings 7/16", 1 kw/fittings EIA 7/8", 2kW; materials: inox, silver coated copper, Teflon, composite covers
268	FM broadcasting antennas	8529	10	92	00	Dipole/"Skewd-V Dipoles/ directional
269	Power dividers	8529	10	92	00	FM/UHFA/HF (2, 4, 6, 8 lines)
270	Video receiving antennas	8529	10	92	00	Yagi VHF Band-lll/UHF Band-IVA/
271	FM receiving antennas	8529	10	92	00	Yagi/dipole
272	Two-antenna diplexers	8529	10	92	00
273	Antenna filters and amplifiers	8529	10	92	00	FM/VHF Band-lll/UHF Band-IVA/
274	DC source supply and RF connectors	8529	10	92	00
275	Specialized FM receivers	8529	10	92	00	Of a frequency range of between 87.3 and 108 MHz
276	Specialized VHF/UHF video receivers	8529	10	92	00	Of a frequency range of between 46-870 MHz
277	Syntonisation adjusters with flange	8529	10	92	00	1-5/8"; 3-1/8"; 4-1/2" - FM/VHF/UHF
278	Gate converters	8529	90	99	00	3 doors 7/8"; 4 doors 7/8"; 3 doors 1-5/8"; 4 doors 1-5/8"; 6 doors 1-5/8"; 7 doors 1- 5/8"; 3 doors 3-1/8"; 4 doors 3-1/8"; 7 doors 3-1/8"
279	Medium-voltage capacitors	8532	10	00	00	8.66- 12.7 kv
280	Fuse cut out	8535	10	00	00	6-35kv;100A
281	High-voltage switches	8535	30	10	10	For a voltage of 10 - 35 kV. Standard current of between 200 and 1,250 A
282	Load breaker switches	8535	30	10	10	22-35 kv; 400-630A
283	Anti-lightning devices for power lines	8535	40	00
284	Lightning protection equipment	8535	90	90		LPS
285	LAN lightning prevention equipment	8535	90	90		POSTEFPP-RJ45/16
286	Anti-lightning devices on [transmission] lines	8535	90	90		POSTEF HSP 10-72V, POSTEF PCX-T43, POSTEF-B180, POSTEF-B480 Used in the postal sector
287	Automatic circuit breakers of all kinds (ashore)	8536	20	00		U of up to 500 V I of up to 600 A
288	Lightning suppressors	8536	30	00	10	High intensity on first and second floor
289	Multistage Surge Filters	8536	30	00	10
290	Systems of lightning ground connection	8536	30	00	10	From 10 to 40 columns
291	Switches and current-converting switches (ashore)	8536	50			I of up to 3,000 A
292	Magnetic starters (ashore)	8536	90	99		Ucd 220 V, 380 V I of between 4 A and 450 A
293	Iron or composite conduit boxes	8536	90	29	00
294	Electric cabinets (ashore)	8537				Cabinet shells coated with electrostatic paint, fitted with telephony equipment or telecommunications equipment inside
		8537	10	10	90	Low-voltage electric cabinets of 400 V, 75-2,500A
		8537	10	10	90	Medium-voltage electric cabinets of 7.2-36 KV, 630-3,000A
		8537	10	10	90	Electric cabinets for control and protection of lines and MBA
295	Grid control and security cabinets, and transformers	8537				At transformer stations for a voltage of up to 220 kV
296	Waterway navigation signal lights BH-998P	8539	90	90
297	Diodes, other than photosensitive or light emitting diodes	8541	10	00	00
298	Transistors, other than photosensitive transistors:	8541	21	00	00
299	Thyristors, diacs and triacs, other than photosensitive devices	8541	30	00	00
300	Photosensitive semiconductor devices, including photovoltaic cells whether or not assembled	8541	40
	in modules or made up into panels; light emitting diodes:
301	Electronic integrated circuits	8542
302	Other electric conductors, for a voltage not exceeding 1,000 V:
	- - Fitted with connectors:	8544	42
	- - - Of a kind used for telecommunications, for a voltage not exceeding 80 V:
	- - - - - Telephone, telegraph and radio relay cables, submarine	8544	42	11	00
	- - - - - - Plastic covered electric cables having a cross section not exceeding 300 mm2	8544	42	19	10
	- - - - Telephone, telegraph and radio relay cables	8544	42	19	20
	- - - Of a kind used for telecommunications, for a voltage exceeding 80 V but not exceeding 1,000 V:	8544	42	20
	- - - - - Telephone, telegraph and radio relay cables, submarine	8544	42	20	10
	- - - - - Telephone, telegraph and radio relay cables, excluding submarine kinds	8544	42	20	20
	- - - - Plastic insulated electric cables having a cross section not exceeding 300 mm2	8544	42	90	10
	- - - - Plastic covered electric conductors	8544	42	90	20
	- - - Of a kind used for telecommunications, for a voltage not exceeding 80 V:
	- - - - Telephone, telegraph and radio relay cables, submarine	8544	49	11	00
	- - - - Telephone, telegraph and radio relay cables	8544	49	19	10
	- - - Of a kind used for telecommunications, for a voltage exceeding 80 V but not exceeding 1,000 V:
	- - - - Telephone, telegraph and radio relay cables, submarine	8544	49	31	00
	- - - - - Telephone, telegraph and radio relay cables	8544	49	39	10
303	Fibre-optic cables	8544	70	10	00	Telephone, telegraph and radio relay cables, submarine
304	Electrically insulated porcelain	8546	20	00		Of ceramics, for a voltage of up to 35 kV
305	Railway passenger coaches	8605	00	00		Various kinds (hard seats, soft seats; hard berths, soft berths; double-deck coaches; B coaches), high-class coaches, of the second generation and a length of 20 meters
306	Dining coaches, public-duty and generator coaches, luggage coaches	8605	00	00
307	Composite tank wagons for the transport of fluids	8606	10	00		Of a capacity of up to 30 mJ
308	H coaches	8606	10	00		Of a length of 14 m, fitted with bogies 34B, Mison TQ
309	Over-size H coaches 1435	8606	10	00		Of a length of 14 m and a load of 60 tons
310	Covered cargo coaches	8606	91	00		Of a length of 14 m, fitted with modified bogies 34 B
311	M container coaches	8606	99	00		Of a length of 14 m, fitted with bogies 34B, Mison TQ
312	3-GCH M container coaches	8606	99	00		Of a length of 16 m, fitted with three modified bogies 34 B
313	N (low-wall) coaches	8606	99	00		Of a length of 14 m, fitted with modified bogies 34 B
314	Passenger coach bogies of all kinds	8607	12	00		Indian-type with steel springs, air-spring type
315	Cargo coach bogies of all kinds	8607	12	00		Of welded steel type
316	Small tractors, four-wheel tractors with ploughs, harrows behind	8701				Of between 8 CV and 20 CV
317	Passenger cars	8702	10			Of common type, with between 10 and 50 seats
318	Buses	8702	10	24	90	Of common type, with up to 80 seats
319	Small cars	8703				Of up to 9 seats
320	Light trucks	8704	21			Of a gross tonnage of up to 10 tons
		8704	31
321	Mobile repair vehicles	8704	21	25	90
322	Garbage trucks of all kinds	8704	23	22	00
323	Off road dump trucks	8704	23	29	90	Of a load of up to 15 tons
324	Trucks with lifting appliances	8704	23	29	90	Of a load of up to 2 tons
325	Automobiles with closed cabinets	8704	23	29	90
326	Crane trucks and lift trucks	8705	10	00	00	Capable of lifting up to 14 m
327	Fire trucks	8705	30	00	00	Water (5m3), foam (1m3 foam),
328	Street and park watering vehicles	8705	90	50	00	Of a capacity of 4.5-8 mJ of water
329	Refuse collection trucks	8705	90	90	90	Of a capacity of between 1.6 and 8 m3
330	Mobile television stations	8705	90	90
331	Mobile stages	8705	90	90	90	Of a floor area of between 40 and 65 mz
332	Double-deck motorbike earners	8705	90	90		Of a load of up to 10 motorbikes
333	Tank cars for liquids (chemicals)	8705	90	90	90	Of a capacity of up to 12 mJ
334	Tank cars for oil and gas	8705	90	90	90
335	Hooklift trucks	8705	90	90	90
336	Vehicles maintaining freezing temperatures [of their cargo]	8705	90	90	90	Of a volume of up to 20m'5, the temperature of up to -20°C
337	Vehicle rescue vehicles	8705	90	90	90	Of a load of up to 5 tons
338	Vehicles transporting rare and precious goods	8705	90	90	90	Three layers, fire prevention, alarming system
339	UAZ vehicle bodies	8708	29	99	00
340	Motorcycles	8711	10			Of a cylinder capacity of up to 50 cc
		8711	20			Of a cylinder capacity of between 50 and 250 cc
341	Bicycles and other pedal-powered cycles	8712				Including three-wheel cargo pedicabs
		8712	00	20
		8712	00	30
		8712	00	90
342	Passenger ships	8901	10			Of common type, with up to 300 seats
343	Self-propelled ferryboats	8901	10			All types
344	Oil tankers	8901	20			Of a tonnage of up to 20,000 tons
345	Liquefied gas ships	8901	20			Of a tonnage of up to 5,000 tons
346	Cargo ships	8901	90			Of a tonnage of up to 53,000 DWT
347	River-coastal self-propelled ships	8901	90			Of a tonnage of between 200-1,100 tons
348	Special-purpose barges fitted with cranes of all kinds	8901	90			Of a lifting capacity of up to 4,200 tons
349	Sea barges	8901	90	10		All types
350	River barges	8901	90	10		All types
351	River tug barges	8901	90	10		Of a tonnage of 200-600 tons
352	Special-use barges for oil and gas industry	8901	90	26		Of a length of 109.8 m, a width of 32 m, a height of 7 m and a tonnage of 12,000 tons
353	Container sea liners	8901	90			Of a tonnage of up to 2,000 TEU
354	All kinds of fishing vessels of wood shells	8902				Of an output of up to 600 CV
355	All kinds of fishing vessels of iron shells	8902				Of an output of up to 1,980 CV
356	Composite shell fishing vessels	8902				12m long, 4.8m wide, 3m high; floating line of 1.35m; power of 150 HP; fish-hold capacity of 18m3
357	Fishing service vessels	8902				Of an output of up to 2,000 CV
358	Fishery control vessels	8902				Of an output of up to 600 CV
359	Sea tug vessels	8904				Of an output of up to 7,000 CV
360	Buoy-laying vessels	8904				Of an output of up to 3,000 CV
361	River tug-push vessels	8904				Of an output of up to 5,000 CV
362	Self-propelled dredgers	8905	10	00		Of a capacity of up to 5,000 mJ/h
363	Non-self-propelled dredgers	8905	10	00		Of a capacity of up to 5,000 mJ/h, an output of up to 4,170 CV
364	River and sea dredgers	8905	10	00		With a dredging depth of 10-20 m, an output of up to 3,000 CV
365	Floating docks	8905	90	10		Of a lifting capacity of up to 20,000 tons
366	Special-purpose high-speed ships	8906	90	90		Of a speed of up to 32 nautical miles/h, an output of up to 3,200 CV
367	High-speed canoes	8906	90	90		Of a length of 4.2m; of a width of 1.71 m, of a height of 0.55m; water-line of 0.25m; of a power of 25-60 HP; of a capacity of between 4 and 6 people
368	Life-boats with closed sides	8906	90	90		Of a length of 4.9m; of a width of 2.2m, of a height of 1 m; water-line of 0.8m; of a capacity of 28 people; of a power of 29 HP;
369	Marine research ships	8906	90	90		Of an output of up to 5,000 CV
370	Buoy-laying machines of all kinds	8907				Of a lifting capacity of up to 5 tons
371	Optical fibres, optical fibre bundles and cables:	9001	10	10	00	For telecommunications and other electrical use
372	Imaging machines	9006	91	00
373	Electronic scales	9016	00	10		C-3000, C30K, C-6000, C-150KP, C-60KP, used for postal service
374	Automatic electronic scales	9016	00	10		For up to 120 tons
375	Ultraviolet lights	9018	20	00	00
376	Sterilized plastic syringes of all sizes	9018	31	90
377	Auto locked syringes	9018	31	90
378	Intravenous fluid transmission sets	9018	39	90
379	Blood transfusion sets	9018	39	90
380	Bulb syringes for enema	9018	39	90	00
381	Nasal tubes	9018	39	90	00
382	Stomach tubes	9018	39	90	00
383	Fluid transmission tubes of the butterfly shape	9018	39	90	00
384	Urine bags	9018	39	90	00
385	Electric acupuncture machines	9018	90	90		DC 6v - 2f-c
386	DINHMAN gags	9018	90	90
387	Solution containers	9018	90	90
388	Hand-held measuring glasses	9018	90	90
389	Screwing tool to straighten bent bone	9018	90	90
390	Uterine manipulators	9018	90	90
391	High frequency electric bistouries	9018	90	90
392	Bistouries adjoined to handles No. 12	9018	90	90
393	Distilled water makers	9018	90	90
394	C02 surgical laser machines of all kinds	9018	90	90
395	Therapeutic He-ne laser machines	9018	90	90
396	Pulse electric machines	9018	90	90
397	Blood pipette shaking machines	9018	90	90
398	12-traditional recipe simmering machines	9018	90	90
399	Plates for feeding microbe	9018	90	90
400	Sterilized wooden tongue depressors	9018	90	90
401	Catheter to extract body fluid	9018	90	90
402	Belly button clips for new born babies	9018	90	90
403	Surgical scissors of all kinds	9018	90	90
404	Maier cotton gauze smooth-tip forceps	9018	90	90
405	Bonzeman cross-hatched sterilizer forceps	9018	90	90
406	Instrument trays	9018	90	90
407	Seminal duct forceps	9018	90	90
408	Blood forceps of all kinds	9018	90	90
409	Uterus forceps of all kinds	9018	90	90
410	Hegar surgical needle holders of all kinds	9018	90	90
411	Semen separating forceps	9018	90	90
412	Foerster sponge forceps	9018	90	90
413	Babacop fallopian tube forceps	9018	90	90
414	Disposable acupuncture needles	9018	90	90
415	Vaginal speculum of all kinds and all sizes	9018	90	90
416	Steam autoclaves	9018	90	90
417	Instrument sterilized boiling type	9018	90	90
418	Dilatation of cervix of all sizes	9018	90	90
419	Machines for treatment of benign prostatic hyperplasia by using ultrasonic waves	9018	90	90
420	Waste water buckets with lids	9018	90	90
421	Karman pumps and catheters	9018	90	90
422	Feeding tube	9018	90	90
423	Curette for removing placenta	9018	90	90
424	He-Ne laser therapy machine	9018	90	90
425	Infra-red laser therapy machine	9018	90	90
426	Devices destroying injection needles	9018	90	90
427	Combined electric meters and registers	9028				For metering electric motors of an output of under 50W, voltage and power
428	One-phase and three-phase electric meters	9028	30	10	00	U of up to 380 V I of up to 100 A
429	One-phase and three-phase electronic meters	9028	30	10	00
430	Composite boxes of electricity meters	9028	90	90	00
431	1-phase and 12-position meter verification devices	9031	80	92	00
432	1-phase and 40-position meter verification devices	9031	80	92	00
433	Alarm-clocks	9105	11	00	00
		9105	19	00	00
434	Wall clocks	9105	21	00	00	Electrically operated
435	Card-accepting gate entry and exit control devices	9106	10	00
436	Rubber sticks	9304	00	90
437	Electric sticks of all kinds	9304	00	90
438	Tear gas sprayers	9304	00	90
439	Sterilized hand washing sets	9402	90	90	00
440	Inox-made patient stretchers of all kinds	9402	90	90	00
441	Inox-made examining tables of all kinds	9402	90	90	00
442	Surgical tool tables of all kinds	9402	90	90	00
443	Delivery beds of all kinds	9402	90	90	00
444	Injection beds	9402	90	90	00
445	Inox-made tables for changing bandages	9402	90	90	00
446	Wheeled patient stretchers of all kinds	9402	90	90	00
447	Folded stretchers of all kinds	9402	90	90	00
448	Patient beds of all kinds	9402	90	90	00
449	Newborn baby beds	9402	90	90	00
450	Patient beds with bed-planks made of inox	9402	90	90	00
451	Emergency beds with two cranks and three positions	9402	90	90	00
452	Electric emergency beds	9402	90	90	00
453	Multi-functional beds	9402	90	90	00
454	Swivel chairs for health examination	9402	90	90	00
455	Stainless steel I.V. bottle holder	9402	90	90	00
456	Sterilized stands	9402	90	90	00
457	Medical tool steamers	9402	90	90	00
458	Medical trays with lids	9402	90	90	00
459	Medical tool steamers	9402	90	90	00
460	Medical trays with lids	9402	90	90	00
461	Medical cabinets with no poison drawer	9402	90	90	00
462	Patient stretcher trolleys	9402	90	90	00
463	Inox oxygen trailers	9402	90	90	00
464	Inox medical trolleys	9402	90	90	00
465	Inox housekeeping trolleys	9402	90	90	00
466	Patient's clothing carriers	9402	90	90	00
467	Tool trolleys	9402	90	90	00
468	Medicine cabinets having a poison drawer	9402	90	90	00
469	Four drawer tool cabinets	9402	90	90	00
470	Night stands BN Inox with no sides	9402	90	90	00
471	Warming cabinets	9402	90	90	00
472	Cabinet dryers	9402	90	90	00
473	Poison absorbing cabinets	9402	90	90	00
474	Sterilizing cabinet dryers	9402	90	90	00
475	Arm and leg splinters (INOX)	9402	90	90	00
476	Manual rolling toolkits	9402	90	90	00
477	Specialized sets of articles used to collect and preserve traces DV-03	9402	90	90	00
478	Flash-lights	9405	40	90		Of DP-DL-DT05
479	Dead spot area detectors	9405	60	90	00
480	Warning signs of reflected light aluminium	9405	60	90	00	For autos, motors, traffic signs

LIST

OF CONSTRUCTION SUPPLIES IN THE CATEGORY OF ABLE TO BE PRODUCED DOMESTICALLY
(Issued with Circular 04/2009/TT-BKH of of the Ministry of Planning and Investment dated 23 July 2009)

No.	Name of goods	Code in the import tariff list				Symbols of specifications, description of technical features
No.	Name of goods	Heading	Sub-heading
1	Kitchen salt	2501	00	10		Refined salt and industrial salt (NaCI)
2	Sand	2505	90	00		Black sand and yellow sand
3	Quartz	2506	10	00		In the form of powder and white
4	Clays, silty clays	2507	00	00	00
5	Kaolin	2507	00	00	00	AI203;21-37%
6	Bentonite for cast-in-place piles	2508	10	00	00	HPB600-API, in light yellow powder, of high viscosity, for use as a drilling mud for cast-in-place piles, petroleum exploration and exploitation
7	Bentonite in casting moulds	2508	10	00	00	In light yellow powder
8	Bentonite for drilling wells	2508	10	00	00	NPB600-H, in light yellow powder, of low viscosity, for use as a drilling mud for geological exploration and underground water exploitation
9	Barite API	2511	10	00	00	In light beige powder
10	Diatomite	2512	00	00		In powder form
11	Marble blocks, slabs and slates	2515
		6801	00	00
12	Granite, basalt, base and sabbase blocks, slabs and slates	2516
		6801	00	00
13	Construction stone and gravel	2517	10	00	00
14	Dolomite	2518				In gray or white powder
15	Limestone and limestone powder	2521	00	00
16	Lime	2522
17	Clinker	2523	10			For production of Portland cement
18	Sulphate-resisting cement	2523	30	00		PCs, PChs
19	Pozzolanic cement	2523	90	00		PCpuz
20	Low-heat cement	2523	90	00		PCit
21	Portland cement	2523	29			PCB30, PCB40, PC30, PC40, PC50
22	White Portland cement	2523	21	00	00	PCw
23	Mica	2525	20	00	00	In white-clear flakes, of a size of between 16 and 100 mesh
24	Feldspar	2529	10	00	00	In white or light-yellow powder or granules
25	Fluoride	2529	21	00	00	In powder
		2529	22	00
26	Bottled oxygen	2804	40	00	00	Purity > 99.6%
27	Bottled nitrogen	2804	30	00	00	Purity > 99.95%
28	Dioxide carbon (liquid, solid)	2811	21	00	00	Purity > 99.6%
29	Calcium chloride (CaCI2)	2827	20	10	00	In white powder
30	Carbonate calcium (CaC03)	2836	50			In white powder or granules
31	Flour silicate	2839	90	00		In light yellow powder
32	Acetylene (C2H2)	2901	29	10		Purity > 99.7%
33	Bio safe DAK	2912				In paste liquid form, coloured from light yellow to yellow
34	DMC-lub	2942	00	00		In mud form and dark color
35	Paints for drilling platforms and other structures	3208	90
		3209	90	90
36	Chemical paints of all kinds	3208				All kinds of paints for specific industrial decoration
		3209
37	Solvents accompanying paints	3209	90			In light yellow powder
38	Industrial adhesives	3506
39	Conductor coupling stands	3538	10			ODF conductor, IDF conductor
40	Refractory mortar	3816	00	10		Alum paste and chamotte
41	HDPE plastic tubes for protection of communication cables	3917	29	00		(j) 32 mm- <\|> 40 mm
42	Multi-layer aluminium plastic tubes	3917	29	00		Inner diameter of up to
43	PVC tubes and accessories	3917	29	00		<\|)20 -="" 4="">200 mm
44	Plastic roofing sheets and boards	3920				0.9 mm x 0.8 mx2 m
		3921
45	Panels of Polyurethane	3921	13	00		50-200 mm thick
46	Plastic doors	3925	20	00
		3925	30	00
47	Civil-use water supply and drainage washers	4016	99	90		To be fitted to cast iron, plastic, and concrete pipelines
48	Rubber sheets	4016	99	90
49	Electrically insulated carpets	4016	99	90		For a voltage of 10-22-35 kV, of a size of 1 m x 0.64 m x 0.008 m
50	Electrically insulated boots and gloves	4016	99	90		For a voltage of 10-22-35 kV
51	Rubber carpets for physical training and sports	4016	99	90		Size of 1 x 0.008 m for badminton courts
52	Bamboo boards	4602	90	00		For use as construction cofferings
53	Wood for chocking or lining on drilling platforms	4407	99	00
54	Coffering wood of standard sizes	4409	29	00
55	Sets of all kinds	6801	00	00
56	Millstones, grinding wheels or the like	6804	10	00		Made of artificial corundum granules, ceramic adhesive. Of an outer diameter of between 5 mm and 900 mm, a thickness of between 5 mm and 300 mm
57	Grinding wheels of agglomerated abrasives containing grindstone granules of over 99% of Al203	6804	22	00		Made of artificial corundum granules. Available in square, rectangular and other unusual shapes
58	Edge grindstones, metal-cutting stones, containing grindstone granules of over 99%ofAI203	6804	30			Made of artificial corundum granules, plastic adhesive. Wheel-shaped stones, of an outer diameter of between 100 mm and 350 mm, a thickness of between 1.5 mm and 5 mm
59	Artificial abrasive powder (granule)	6805				Rough and fine granules, made from aluminium bauxite ore
60	Products of cement and concrete	6810
61	Electric wire poles of centrifugal concrete	6810	91	00		For grids of up to 35 kV
62	Block bricks	6810	11	00		Created by compressing cement and sand
63	Products of asbestos cement, cellulose fibre cement or the like	6811
64	Roofing sheets of fibro-cement and asbestos cement	6811	40	00		920 x 1,500 mm
65		6811	20	00
66	Refractory bricks	6902	10	00		Mg-Chrome, Mg-Spinel (MS80, MS86), Chamotte A (TS A), Chamotte B (TS B)
67	Walling and flooring tiles	6904				(Ceramic, Granite, Cotto, Terrazo, Brestonstone, Terastone), of a size of up to 500 mm x 500 mm
		6907
		6908
68	Building bricks, flooring tiles, roofing tiles	6904
69	Ceramic sanitary ware	6910				All kinds
70	Flat glass, frosted glass, reflective glass	7003	12	20		Of a thickness of between 1.5 -18 mm
		7003	12	90
		7003	19	20
		7003	19	90
		7004	20	20
		7004	20	90
		7004	90	20
		7004	90	90
		7005	10	20
		7005	10	90
		7005	21	20
		7005	21	90
71	Multiple-walled glass	7008	00	00		Of a thickness of between 1.5 -18 mm
72	Mirror	7009				Of a thickness of between 1.5-18 mm
73	Hot-rolled band and coiled steel, already soaked for rust removal	7208				SPHC/O, of a width of 600 mm or more
		7208	26			In coils of a thickness of 3-4 mm
		7208	27			In coils of a thickness of 1.5-3 mm
		7208	53			In sheets of a thickness of 3-4 mm
		7208	54			In sheets of a thickness of 1.5-3 mm
74	Cold-rolled band and coiled steel	7209				SPCC, SPCC-1, SPCC-2,4,8, SPCD, SPCE, of a width of 600 mm or more
		7209	16			In coils, a thickness of 1-1.8 mm
		7209	17			In coils, a thickness of 0.5-1 mm
		7209	18			In coils, a thickness of 0.15-0.5 mm
		7209	26			In sheets, a thickness of 1-1.8 mm
		7209	27			In sheets, a thickness of 0.5-1 mm
		7209	28			In sheets, a thickness of 0.15-0.5 mm
75	Zinc-plated steel sheets	7210	30	10	10	Of a thickness not exceeding 1.2 mm
76	Aluminium-zinc alloy-plated steel sheets	7210	61	10		Of a thickness not exceeding 1.2 mm
77	Zinc-plated and coloured steel sheets	7210	70	10		Of a thickness not exceeding 1.2 mm
78	Aluminium-zinc alloy-plated and coloured steel sheets	7210	70	90		Of a thickness not exceeding 1.2 mm
79	Bar steel, steel coils of all kinds (round plain and veined)	7213	10	20	00	4>5.5 - ((40 mm
		7214	10
		7214	20	00
		7214	91
80	Steel in shapes	7216				Steel with U, I, L, T shapes, of a height of up 140 mm
81	Common steel wire (black and zinc-plated)	7217	10	10		1 - 5 mm
		7217	20	10
		7217	90	20
82	Cast iron pipes (gray cast iron, ductile cast iron)	7303	00	10		Those of common types and those with a cross-section of 150 - 600 mm and a length of 5 - 6 m
83	High pressure pipes, valve doors	7304	31			Of steel for hydropower projects, of a thickness of between 6 and 20 mm, pressure of over 15 at
84	Black or zinc-plated welded steel pipes of all kinds	7304				14 - 115 mm
85	Large-size twisted welded steel tubes of all kinds	7304				400 - 2,600 mm
86	Steel pressure pipes	7306	30	90
87	All kinds of doors and door frames of iron or steel	7308	30	00		Of common types
88	Steel girdles of road bridges and railroad bridges	7308	10	90		Steel girdles of road bridges of a span of up to 100 m, a tonnage of H30, Steel girdles of railway bridges, of a span of up to 100 m, and a tonnage of T26,
89	House frames, warehouse frames, pre-fabricated house structures of steel	7308	90	90	00	Including space frames
		9406	00	94	00
90	Roofing sheets- corrugated zinc-plated or coloured steel sheets	7308	90	30		Of a thickness of 0.25-0.55 mm, and a length of 3,500 mm
91	Tanks of all kinds	7309	00	00		Of common types
89	Casks of all kinds	7310				Of common types
90	Steel cables	7312	10	10	00	Structured of up to 37 fibres, a cross section of up to 170 mm2
91	Zinc-plated wire, barbed wire	7313	00	00
92	Steel or iron grill, netting, fencing	7314	20	00		Of common types
		7314	50	00
93	Iron and steel nails	7317
94	Screws, bolts, nuts, washers	7318				Of common types
95	Bar copper	7407	10	30	00
96	Round copper	7408	11	00	90
97	Round copper wire	7408	11	10		With a cross section of between 16 and 630 mm2
98	Flat electromagnetic wires	7408	11	00	90
99	Flat copper	7409	11	00	00
100	Tubes and copper pipelines of all kinds	7411	10	00	00
		7411	21	00	00
		7411	22	00	00
101	Uncoated copper cable	7413	00	11
		7413	00	12
102	Electric wires of all kinds	7605				Non-alloy aluminium core
		8544				Non-alloy copper core
103	Shaped aluminium structures	7610	10	00
		7610	90	90
104	Electric wires - uncoated aluminium cables with steel cores	7614	10			Of a cross section of between 35 to 1,200 mm2
105	Electric wires - uncoated aluminium cables	7614	90			Of a cross section of between 16 and 1,200 mm2
106	Safety signboards	8310	00	00		Of a mixture of composite plastic and glass fibres
107	Welding wires	8311	20			NAEH14, of a cross section of 2.4; 3; 4.0
						NA71T1, of a cross section of 1.0; 1.2; 1.6
						NA70S, of a cross section of between
						0.8 and 1.6
108	Welding rods	8311	30			NT6013, NB6013, NA6013, NA7016, NA7018, of a size of 2.5; 3.25; 4.0; 5.0-5.4
109	Multi-purpose joints	8483	60	00		HH50
110	Tubes of safety fuses	8536	10	00		24 x 32 of composite
111	Iron and composite boxes of electricity meters	8538	10			Boxes of 1, 2, 4, 6 one-phase meters. Boxes of three-phase meters
112	Conductor dividers	8538	10			6-way iron boxes, 6-way and 9-way composite boxes
113	Telephone cables	8544	49			Of a diameter of between 0.4 and 0.9 mm, between 6 and 1,200 pairs
114	Cable with copper or aluminium core, AC, electrically insulated with PE, PVC for overhead medium-and low-voltage power lines	8544	11	20		With 1 or two cores, with a cross section of up to 630 mm2 eacn core With 3 or 4 cores, with a cross section of up to 400 mm2 each core
		8544	11	30
		8544	20	10
		8544	20	20
115	Data transmission cables (LAN cables)	8544	49			CAT5, CAT5E, CAT6
116	Telephone subscriber wire	8544	49			Single or multiple filaments
117	Low-, medium- and high-voltage cables, electrically insulated with plastics and EPR	8544	51			Of a (core) cross section of up to 2,000 mm2 for one-phase lines and a voltage of 0.6kV-170kV
		8544	59
		8544	60
118	Control cables of all kinds	8544				Consisting of between 2 and 91 cores; Of a cross section of between 0.5 and 16 mm2
119	Optic fibre cables	9001	10			Used for the postal service
120	High-voltage circuit breakers	8535	30	10	10
121	Load breaker switches	8535	30	10	10
122	Fuse cut out	8535	30	10	10	6-35 kv
123	Lamp bulbs and tubes of all kinds	8539	21			Filament lamps of common type
		8539	22
		8539	31			Compact lamps 2U, 3U, of a power of 5-20W
		8539	39			Fluorescent tubes FHF of a power of 32 W, fluorescent tubes FLD of a power of 18 W and 36 W

LIST

OF SUPPLIES NECESSARY FOR PETROLEUM OPERATIONS IN THE CATEGORY OF BE ABLE TO BE PRODUCED DOMESTICALLY
(Issued with Circular 04-2009-TT-BKH of the Ministry of Planning and Investment dated 23 July 2009)

No.	Name of goods	Code in the import tariff list				Symbols of specifications, description of technical features
No.	Name of goods	Heading	Sub-heading
1	Rice husk	1213	00	00
2	Bio safe	1515	19	00		In liquid form
3	Kitchen salt (sodium chloride)	2501	00	10
4	Graphite powder	2504	10	00
5	Quartz	2506	10	00		In white powder
6	Bentonite for cast-in-place piles	2508	10	00		HPB600-API, in light yellow powder, of high viscosity, for use as a drilling mud for cast-in-place piles, petroleum exploration and exploitation
7	Bentonite for casting moulds	2508	10	00		In light yellow powder
8	Bentonite for drilling wells	2508	10	00		NPB600-H, in light yellow powder, of low viscosity, for use as a drilling mud for geological exploration and underground water exploitation
9	Soundproof- or heat- resistant materials of basalt	2508	40	00		In sheets
10	Marble powder	2517	41	00
11	Dolomite	2518				In gray and white powder
12	P300 cement	2523	29	10		For construction of marine projects
13	Thermal cement for drilling wells	2523	90	00
14	Class-G cement	2523	90	00
15	Mica	2525	20	00		In white, transparent flakes, of a size of between 16 and 100 mesh
16	Feldspar	2529	10	00		In white or light-yellow powder or granules
17	Condensate	2709	00	20
18	Crude oil	2709	00	10
19	Mogas 91 petrol	2710	10	11	11
20	Mogas 83 petrol	2710	10	11	14
21	JetA1 petrol	2710	11	20	00
22	Industrial oils	2710	19			ISO (150EP, 32TL, 37TL, 46TL, 68TL, 100TL)
23	Lubricating grease	2710	19	26		Lithium grease (L2, L3, L4), Cana 1-13, MC70
24	Lubricating oils	2710	19	43	00	SAE (30ART, 30GD, 40HDGM, 40GD, 50RT, 30RMX, 40RMX, 90TDEP, 140TDEP(GL5))
25	Hydraulic oils	2710	19	50		VIT32, VIT45, VIT68, VIT100, VIT220
26	DO oil	2710	19	71	00
27	FOoil	2710	19	79	00
28	Propylene	2711	14
29	Natural gas	2711	21	00
30	Raw gas	2711	29	00	00
31	Bupro, LPG	2711
32	Hydrochloric acid	2806	10	00
33	Ammonia (NH3)	2814
34	Calcium chloride (CaCI2)	2827	20	10		In white powder
35	Barite API	2833	27	00		In light beige powder
36	Bi-potassium alum	2833	30
37	Limestone (CaC03)	2836	50			In white powder or granules
38	Flour silicate	2839	90	00		In light yellow powder
39	DMC - Lub	2942	00	00		In viscous form, dark-coloured
40	Paints for drilling platforms and steel structures	3208	10	90	10
		3209	90	90
41	Chemical paints of all kinds	3208				All kinds of paints for specific industrial decoration
		3209
42	Solvent, accompanying paints	3209	90	00		In light yellow powder
43	UF DAK adhesive	3506
44	DOP plasticizers	3812	20	00	00
45	PVC plastic powder	3904	10
46	Organic siliceous polymer	3910
47	Wooden boards, for chocking or lining on drilling platforms	4407	99
48	Labour protection devices	6210	10			Clothes, shoes, boots, helmets, napkins and gloves
		6216	00	10
49	Pipe threads and drilling rods	7304	90	00
50	Signboards on drilling platforms	8310	00	90
51	Other drilling chemicals					Foaming agents, aluminium stearate, surfactants

LIST

OF RAW MATERIALS, SUPPLIES AND SEMI-FINISHED PRODUCTS IN THE CATEGORY OF ABLE TO BE PRODUCED DOMESTICALLY
(Issued with Circular 04/2009/TT-BKH of the Ministry of Planning and Investment dated 23 July 2009)

No.	Name of goods	Code in the import tariff list				Symbols of specifications, description of technical features
No.	Name of goods	Heading	Sub-heading
1	Crude soya oil	1507	10	00
2	Semi-finished soya oil	1507	90	20
3	Crude ground-nut oil	1508	10	00
4	Semi-finished ground-nut oil	1508	90
5	Crude coconut oil	1513	11	00		Crude oil contained in tanks, semifinished oil on the production chain
6	Semi-finished coconut oil	1513	19	20
7	Crude sesame oil	1515	50	10
8	Semi-finished sesame oil	1515	50	20
9	Cane sugar	1701	11	00
10	Glucose	1702	30	10
11	Shrimp flavour powder	2103	90	20
12	Crab soup base	2103	90	90
13	Tobacco leaves, not stemmed	2401	10	00		Heat-dried yellow, sun-dried brown, burley
14	Tobacco leaves, stemmed	2401	20	00		Heat-dried yellow, sun-dried brown, burley
15	Tobacco stems	2401	30	10		Big stems, small stems (diameter > 1.5 mm, humidity 9-10%)
16	Kitchen salt	2501	00	10
17	Pure pyrite ore	2502	00	00		FeS₂ (>=33%S)
18	Fire clay	2507	00	00
19	Apatite ores of all kinds	2510	10			Ca₅F(P0₄)3 with a gross content of P205 >= 24%
20	Marble slates	2515	12	20
21	Granite slates	2516
22	Dolomite	2518	10	00
23	Serpentine ore	2519	90	00		MgOSi0₂.2H₂0
24	Lime	2522
25	Portland cement clinkers for manufacture of cement	2523	10	00		PC 30, PC 40, PC 50; Clinker
26	Cement of all kinds	2523	10	00		PC 30, PC 40, PC 50 Loose and packed cement (50 kg/pack)
27		2523	29
28	Fluoride ore	2529				CaF₂ > 75%
29	Iron ores	2601	00	00
30	Agglomerated iron ores	2601	12	00
31	Manganese ore	2602	00	00		Mn: 35-40%
32	Manganese dioxide	2602	00	00		Mn0₂ >= 68%
33	Pure copper ore	2603	00	00		18-20% Cu
34	Pure lead sulphide ore	2607	00	00		55% Pb
35	Zinc ores of all kinds	2608	00	00		28-30% Zn
36	Pure chromium ore	2610	00	00		46% Cr₂0₃
37	Pure wolframite ore	2611	00	00		65% W0₃
38	Pure ilmenite ore	2614	00	00		Ti0₂: 52-54%
39	Pure rutile ore	2614	00	90		Ti0₂: 90%
40	Pure zircon ore	2615	10	00		Zr0₂: 62-65%
41	Fat coal	2701	12	10
42	Coke for metallurgy	2704	00	10
43	Liquefied chlorine	2801	10	00		Cl₂ >=99.5%
44	Carbon	2803	00	10		Carbon content >= 98%
45	Bottled nitrogen	2804	30	00		Nitrogen > 99.95%, liquefied nitrogen > 99.95%
46	Bottled oxygen	2804	40	00		In liquefied gas 02 > 99.6%
47	Yellow phosphorus	2804	70	00
48	Pure hydrochloric acid hydrochloric acid	2806	10	00		HCI (KT) >= 30%; pure HCI
49	Sulphuric acid	2807	00	00		H₂S0₄ >=97%
50	Phosphoric acid	2809	20	00		H₃PO₄ >= 98%
51	Zinc oxide powder	2817	00	10		60% Zn, 80-90% ZnO
52	Aluminium hydroxide	2818	30	00		AI(OH)₃(>=63%AI₂0₃)
53	Sodium chloride	2827	39	00
54	Aluminium sulphate	2833	22	00		Al₂ (S0₄)₃.18 H₂0 (>= 15% Al₂0₃) Al₂ (S0₄)3.14 H₂0 (>= 17% Al₂0₃)
55	Alum	2833	30	00
56	Aluminium ammonium sulphate	2833	29	90		AINH₄ (S0₄).12 H₂0 (>= 10.3% Al₂0₃)
57	Disodium carbonate	2836	20	00
58	Magnesium carbonate	2836	99	00
59	Sodium silicates	2839	19	10		NaSi0₃ Module 2.2-3.4
60	Acetylene	2901	29	10		C₂H₂ > 99.7%
61	Surfactants used for production of cleansing substances (LAS)	2902	90	90
62	Rutile	2938	10	00
63	Compounds for production of antibiotics	2941	10			Amoxilin, ampicilin
64	Artemisinin	2942	00	00	00
65	Vinachitin biological films	3001	90	00	00
66	Carbon cancellous bones	3001	90	00	00
67	Surgical bands	3005	10	10	00
68	Carbon cotton bands	3005	90	10	00
69	Surgical cotton bands (being or not being sterilized)	3005	90	10	00
70	Plaster cast of all sizes	3005	90	10	00
71	Biological polymer bands	3005	90	10	00
72	Sterilized navel dressing	3005	90	10	00
73	Sterilized urgobands	3005	90	10	00
74	Adhesive gauzes	3005	90	20	00
75	Sterilized surgical gauzes	3005	90	20	00
76	Surgical absorbent gauzes	3005	90	20	00
77	Biological polymer films	3005	90	90	00
	covering gauzes
78	Biological polymer films	3005	90	90	00
79	Surgical sutures of all kinds and sizes	3006	10	90	00
80	Diamonium phosphate	3105	30	00	00
81	Shrimp flavour oil	3302	10	10
82	Prepared explosives	3602	00	00		Pursuant to Decision 03-2006-QD-BCN of the Ministry of Industry
83	Detonators, fuses, detonating cords	3603				Pursuant to Decision 03-2006-QD-BCN of the Ministry of Industry
84	Compound plasticizers for rubber or plastic	3812	20	00		DOP plasticizer
85	PVC granules	3904	10	39
		3904	21	21
86	PVC tubes and pipes	3917	23	00
87	PVC membranes	3919	90	10
88	Plastic membranes	3920	43	00		Of a thickness of 0.05 - 0.4 mm
89	PVC wall-covering sheets	3925	90	00
90	Natural rubber	4001	10
		4001	21
		4001	29
92	Timber and wood chips, of non-coniferous wood	4401	22	00
93	Small wood pieces for making matches	4421	90	20
94	Newsprint, in rolls or sheets	4801	00	10		Of a standard weight of 42-55 g/nf
95	Uncoated paper and paperboard, of a kind used for printing, writing or photocopying, card-making, punch tape paper or waxed base for manufacture of technical paper	4802				Of a standard weight of 40-120g/nf Excluding those under subheadings of 4802.51.20, 4802.60.20, 4802.30.00, 4802.40.00 and 4802.20.00
96	Paper shoe insoles	4804	19	00		For lining shoes
97	Cement packing paper	4804	21	10		Of a standardized weight of 68-75 g/cnf
98	Uncoated and unbleached kraft paper of a low durability (for packing goods and production of small boxes for small articles), and those of a kind already bleached	4804	31	00		24 TCN 78-99
		4804	41	00
		4804	51	00
100	Uncoated paper and paperboard in rolls or sheets: corrugating medium, common type, double-sided Duplex, Duplex with one side in white and another in gray	4805
101	Ultrasound papers	4810	14	50	00
102	Toilet paper, table tissue	4818	10
		4818	20
		4818	30
103	Five-ply cartons	4819	10	00
		4819	20	00
104	200-cigarette cartons with 20 cigarettes in each pack, stiff packs of all kinds	4819	10	00		385*287 mm
		4819	20	00
105	200-cigarette cartons with 20 cigarettes in each pack, soft packs of all kinds	4819	10	00		366287 mm and 376287 mm (Paper or paperboard used as packing)
106	Paper boxes, each for containing a pair of shoes	4819	10	00
		4819	20	00
107	Labels of 20-cigarette stiff packs of all kinds	4821	10			233.5*99.5 mm
108	Base paper, printed, for rolling cigarette filter tips	4823	90	90		Of a standard weight of 28-30 g/crn^
109	Cigarette filter tips	4823	90	90
110	Sewing thread made of synthetic staple fibre	5508
111	Yarn (except for sewing thread) made of synthetic staple fibre	5509	11	00
		5509	12	00
112	Cotton and polyester shoelaces	5609
113	Tire cord fabrics, made of high-tenacity fibre	5902
114	Plastic-coated fabrics	5903				Leatherette, porous leatherette, canvas, soft fabrics
115	Rubber-coated fabrics	5907
116	Packing of textile PP fibre Packing of textile PE-coated PP fibre	6305	33
117	Shoe soles of rubber or plastics	6406	20	00
118	Granite blocs	6802	23	00
		6802	93	00
119	Abrasive powder	6805				Of common-use category
120	Ceramic walling and flooring tiles	6810	19	00		Of a maximum size of 400*400 mm
121	Corrugated asbestos cement sheets	6811	40	00		Corrugated asbestos cement roofing sheets
122	Bricks containing by weight over 50% of alumina	6902	20	00
123	Chamotte bricks	6902	90	00
124	Building bricks, flooring tiles, backing tiles	6904
125	Porcelain sanitary ware	6910				Of common-use category, non-electrically driven
126	Medical glass tubes	7002				f 5 - f 32 mm
127	Flat white and coloured sheet glass	7003				Of common-use category, and a thickness of 1.5- 12 mm
128	Medicine bottles and pots of glass	7010				2310A-2825CE (from 2 ml to 30 ml)
129	Empty glass ampoules for containing injection fluids	7010	10			From 1 to 10 ml (flat bottom, bell- shaped head, needle-shaped tips, in brown or white color)
130	Filament lamp envelopes (bulbs)	7011	10	00		A 60 (round-shaped lamps of all kinds)
131	Fluorescent lamp envelopes (tubes)	7011	10			f 12-f 40 mm
132	Glass inners of vacuum flasks or other vacuum vessels	7020	00	90
133	Gemstones	7103				Ruby, sapphire
134	Gold	7108	13	00		99.99% Au
135	Cast iron	7201	20	00
136	Ferro-alloys: Ferro manganese	7202	11	00		FeMn (65-75%)
		7202	19	00
137	Ferro silicon	7202	21	00		FeSi (45%)
		7202	29	00
138	Steel casts	7206	90	00
139	Hot-rolled coiled steel, already soaked for rust removal	7208	26	00	00	Of a thickness of 3-4 mm
		7208	27	00	00	Of a thickness of 1.5-3 mm
140	Cool-rolled plate and band steel	7209
141	Deformed steel bar	7213	10	00
142	Bar steel	7213	10	10		< 100="">
		7213	91	00		< 14="">
143	Plain round steel bar	7213	99	00
144	Welding rod cores	7213	91	10
145	Bar steel, non-alloy	7214	10			With a carbon content C > 0.6%
146	Bar steel, non-alloy	7214	91	10		Rectangular or square cross-section, C > 0.6%
147	Non-alloy steel, in angles, shapes and sections	7216	10	00		in U, I, H shapes, of a height < 80="">
148	Steel in L shape	7216	21	00		L shape, of a height < 80="">
		7216	40	00		L shape, of a height of between 80 and 140 mm
149	Steel in U shape	7216	31	00		U shape, of a height of between 80 and 140 mm
150	Steel in I shape	7216	32	00		I shape, of a height of between 80 and 140 mm
151	Steel in H shape	7216	33	00		H shape, of a height of between 80 and 140 mm
152	Steel in C and V shapes	7216	50	00		C and V shapes, of a height of between 80 and 140 mm
153	Steel binding rafters	7216	91	00	00	H = 250 mm
154	Steel wires	7217	10	10	00	Note coated with zinc
		7217	20	10	00	Coated with zinc
155	Alloyed steel in shapes	7228	70	00		SS400, SS 540 from L80 to L130; Q235fromC80toC180
156	Tubes and pipes of cast iron	7303	00	10		Of common-use category
157	Welded steel tubes and pipes	7305				Of common-use category, between 20 and 114 mm in diameter
158	Steel structures	7308				Of common-use category and house steel frames, road bridge steel beams of a span of up to 100 m and a load of H30; steel railway bridge steel beams of a span of up to 100 m and a load of T26
159	Reservoirs and tanks	7309	00			Of common-use category
160	Drum-shaped containers	7310	10			Of common-use category
161	Cans and canned food of all kinds	7310	21
162	Iron grill, netting and fence	7314				Of common-use category
163	Chains	7315				Of common-use category
164	Common-use bolts + nuts	7318				Of common-use category
165	Grinding steel balls	7325	91	00		Of common-use category
		7326	11	10
166	Cast moulds	7325	99	00
167	Copper wire for use as raw materials	7408	11	00		Raw material copper for manufacture of electric cable f 6 - f 14 mm
		7408	19	00		f <>
168	Uncoated copper cables	7413
169	Uncoated (non-alloy) aluminium cables	7614	90			Of a cross section of up to 600 mm'
170	Uncoated aluminium cables with steel cores	7614	10			Of a cross section of up to 600 mm'
171	Aluminium profiles	7610				Of common-use category
172	Aluminium nettings	7616	91	00
173	Lead bars	7806	00	90		99.6% Pb
174	Zinc powder, dust and flakes (sulphate)	7903	90	00		48-50% Zn
175	Tin bars	8003	00	10		99.75% Sn
176	Handsaws, saw blades of all kinds	8202				Of common-use category
177	Ploughs, scarifiers and harrows	8432				Of common-use type, trailed by tractors
178	Fluorescent lamp heads	8539	90	61		G13/12*30(26)
179	Cables coated with PE, PVC	8544	11	30		All kinds
180	Electric wire of all kinds	8544				Excluding co-axial cables
181	Lead rubber	9018	90	90		Used in the medical sector
182	Printing ink of all kinds	9608	31	00		Used to print people's identity cards

LIST

OF RAW MATERIALS, SUPPLIES AND SEMI-FINISHED PRODUCTS SERVING SHIP BUILDING IN THE CATEGORY OF ABLE TO BE PRODUCED DOMESTICALLY
(Issued with Circular 04/2009/TT-BKH of the Ministry of Planning and Investment dated 23 July 2009)

No.	Name of goods	Code in the import tariff list			Symbols of specifications, description of technical features
No.	Name of goods	Heading	Sub-heading
1	Wall panels	3925	90	00	BM25, BM50 (of fire protection level B-15)
2	Ceiling panels	3925	90	00	CC25, CC75 (of fire protection levels B-0; B-15)
3	Fire doors	3925	90	00	B-15;A-0;A-60
4	Welding wires	8311	20		NAEH14, sized 2.4; 3.2; 4.0
					NA71T1, sized 1.0; 1.2; 1.6
					NA70S, sized0.8-1.6
5	Welding rods	8311	30		NT6013, NB6013, NA6013, NA7016, NA7018 sized 2.5; 3.25; 4.0; 5.0-5.4
6	Ship boilers	8402	12		Of a capacity of between 0.5 and 35 tons of steam/h

LIST

OF RAW MATERIALS AND SUPPLIES SERVING SOFTWARE PRODUCTION ACTIVITIES IN THE CATEGORY OF ABLE TO BE PRODUCED DOMESTICALLY
(Issued with Circular 04/2009/TT-BKH of the Ministry of Planning and Investment dated 23 July 2009)

No.	Name of goods	Code in the import tariff list				Symbols of specifications, description of technical features
No.	Name of goods	Heading	Sub-heading
I	Tools for inspection and evaluation/Algorithm
1	Source programs created by Vietnamese bodies, organizations and individuals may be used for re-integration or re-amendment upon separate request of the software producers, contained in:
	- Disks used for the laser system for the purpose of reproducing phenomena other than sound and image	8523	40	12
	- Disks used for the laser reading system of other kinds	8523	40	12	90
	- Magnetic tapes used to reproduce phenomena other than sound or image	8523	29	19	90
	- Other magnetic tapes of a width not exceeding 4 mm	8523	29	12	00
	- Other magnetic tapes of a width not exceeding 6.5 mm	8523	29	22	00
	- Other magnetic tapes of a width exceeding 6.5 mm	8523	29	39	20
	- Other kinds used to reproduce phenomena other than sound and image	8523	29	92	10
	- Other kinds	8523	29	92	90
2	Lock disk/Programs preventing illegal reproduction produced by Viet Nam, contained in:
	- Disks used for the laser system for the purpose of reproducing phenomena other than sound and image	8523	40	12
	- Disks used for the laser reading system of other kinds	8523	40	12	90
	- Magnetic tapes used to reproduce phenomena other than sound or image	8523	29	19	90
	- Other magnetic tapes of a width not exceeding 4 mm	8523	29	12	00
	- Other magnetic tapes of a width not exceeding 6.5 mm	8523	29	22	00
	- Other magnetic tapes of a width exceeding 6.5 mm	8523	29	39	20
	- Other kinds used to reproduce phenomena other than sound and image	8523	29	92	10
	- Other kinds	8523	29	92	90
3	Algorithm in technical -scientific problems made by Viet Nam and used in Vietnamese bodies and organizations (optimal control, identification, encoding, formulas, computer graphic processing, image and sound processing and so on), contained in:
	- Disks used for the laser system for the purpose of reproducing phenomena other than sound and image	8523	40	12
	- Disks used for the laser reading system of other kinds	8523	40	12	90
	- Magnetic tapes used to reproduce phenomena other than sound or image	8523	29	19	90
	- Other magnetic tapes of a width not exceeding 4 mm	8523	29	12	00
	- Other magnetic tapes of a width not exceeding 6.5 mm	8523	29	22	00
	- Other magnetic tapes of a width exceeding 6.5 mm	8523	29	39	20
	- Other kinds used to reproduce phenomena other than sound and image	8523	29	92	10
	- Other kinds	8523	29	92	90
4	Algorithm in economic problems made by Viet Nam and used in Vietnamese bodies and organizations (planning, economic analysis and forecast, cost accounting and so on), contained in:
	- Disks used for the laser system for the purpose of reproducing phenomena other than sound and image	8523	40	12
	- Disks used for the laser reading system of other kinds	8523	40	12	90
	- Magnetic tapes used to reproduce phenomena other than sound or image	8523	29	19	90
	- Other magnetic tapes of a width not exceeding 4 mm	8523	29	12	00
	- Other magnetic tapes of a width not exceeding 6.5 mm	8523	29	22	00
	- Other magnetic tapes of a width exceeding 6.5 mm	8523	29	39	20
	- Other kinds used to reproduce phenomena other than sound and image	8523	29	92	10
	- Other kinds	8523	29	92	90
5	Organization methods and algorithm made by Viet Nam in high figure processing problems in Vietnamese bodies and organizations (data processing for inspection, data processing for general inspection and so on), contained in:
	- Disks used for the laser system for the purpose of reproducing phenomena other than sound and image	8523	40	12
	- Disks used for the laser reading system of other kinds	8523	40	12	90
	- Magnetic tapes used to reproduce phenomena other than sound or image	8523	29	19	90
	- Other magnetic tapes of a width not exceeding 4 mm	8523	29	12	00
	- Other magnetic tapes of a width not exceeding 6.5 mm	8523	29	22	00
	- Other magnetic tapes of a width exceeding 6.5 mm	8523	29	39	20
	- Other kinds used to reproduce phenomena other than sound and image	8523	29	92	10
	- Other kinds	8523	29	92	90
6	Algorithm and professional procedures made by Viet Nam in problems of management of humans, natural resources, land, supplies, stores and so on and used in Vietnamese bodies and organizations, contained in:
	- Disks used for the laser system for the purpose of reproducing phenomena other than sound and image	8523	40	12
	- Disks used for the laser reading system of other kinds	8523	40	12	90
	- Magnetic tapes used to reproduce phenomena other than sound or image	8523	29	19	90
	- Other magnetic tapes of a width not exceeding 4 mm	8523	29	12	00
	- Other magnetic tapes of a width not exceeding 6.5 mm	8523	29	22	00
	- Other magnetic tapes of a width exceeding 6.5 mm	8523	29	39	20
	- Other kinds used to reproduce phenomena other than sound and image	8523	29	92	10
	- Other kinds	8523	29	92	90
	Algorithm and professional procedures made by Viet Nam in problems falling into the cipher, security and national defence sectors of Viet Nam, contained in:	8523	40	12
	- Disks used for the laser system for the purpose of reproducing phenomena other than sound and image	8523	40	12	90
	- Disks used for the laser reading system of other kinds	8523	29	19	90
	- Magnetic tapes used to reproduce phenomena other than sound or image	8523	29	12	00
	- Other magnetic tapes of a width not exceeding 4 mm	8523	29	22	00
	- Other magnetic tapes of a width not exceeding 6.5 mm	8523	29	39	20
	- Other magnetic tapes of a width exceeding 6.5 mm	8523	29	92	10
	- Other kinds used to reproduce phenomena other than sound and image	8523	29	92	90
	- Other kinds
7	Other algorithms and calculating methods made by Viet Nam and used in Vietnamese bodies and organizations, contained in:
	- Disks used for the laser system for the purpose of reproducing phenomena other than sound and image	8523	40	12
	- Disks used for the laser reading system of other kinds	8523	40	12	90
	- Magnetic tapes used to reproduce phenomena other than sound or image	8523	29	19	90
	- Other magnetic tapes of a width not exceeding 4 mm	8523	29	12	00
	- Other magnetic tapes of a width not exceeding 6.5 mm	8523	29	22	00
	- Other magnetic tapes of a width exceeding 6.5 mm	8523	29	39	20
	- Other kinds used to reproduce phenomena other than sound and image	8523	29	92	10
	- Other kinds	8523	29	92	90
II	Assisting files
8	Code tapes and standard classification checklists made by Viet Nam and to be commonly used in Viet Nam, contained in:
	- Disks used for the laser system for the purpose of reproducing phenomena other than sound and image	8523	40	12
	- Disks used for the laser reading system of other kinds	8523	40	12	90
	- Magnetic tapes used to reproduce phenomena other than sound or image	8523	29	19	90
	- Other magnetic tapes of a width not exceeding 4 mm	8523	29	12	00
	- Other magnetic tapes of a width not exceeding 6.5 mm	8523	29	22	00
	- Other magnetic tapes of a width exceeding 6.5 mm	8523	29	39	20
	- Other kinds used to reproduce phenomena other than sound and image	8523	29	92	10
	- Other kinds	8523	29	92	90
9	Digitized graphic files made by Viet Nam (vector graphics and bitmap) relating to Vietnam country, contained in:
	- Disks used for the laser system for the purpose of reproducing phenomena other than sound and image	8523	40	12
	- Disks used for the laser reading system of other kinds	8523	40	12	90
	- Magnetic tapes used to reproduce phenomena other than sound or image	8523	29	19	90
	- Other magnetic tapes of a width not exceeding 4 mm	8523	29	12	00
	- Other magnetic tapes of a width not exceeding 6.5 mm	8523	29	22	00
	- Other magnetic tapes of a width exceeding 6.5 mm	8523	29	39	20
	- Other kinds used to reproduce phenomena other than sound and image	8523	29	92	10
	- Other kinds	8523	29	92	90
10	Image library/photo collections/scanned photo files made by Viet Nam contained in:
	- Disks used for the laser reading system of other kinds	8523	40	12	90
	- Other magnetic tapes of a width not exceeding 4 mm	8523	29	12	00
	- Other magnetic tapes of a width not exceeding 6.5 mm	8523	29	22	00
	- Other magnetic tapes of a width exceeding 6.5 mm	8523	29	39	20
	- Other kinds	8523	29	92	90
III	Paper-made packaging of software products
	Paper-made packaging of software products	4817	30	00	00
	Boxes and covers protecting objects carrying information	4819
	Paper-made labels of electronic products	4911	99	90	00

Đã xem:

Đánh giá:

Thuộc tính Văn bản pháp luật 04/2009/TT-BKH
Loại văn bản	Thông tư
Số hiệu	04/2009/TT-BKH
Cơ quan ban hành	Bộ Kế hoạch và Đầu tư
Người ký	Trương Văn Đoan
Ngày ban hành	23/07/2009
Ngày hiệu lực	27/08/2009
Ngày công báo	...
Số công báo
Lĩnh vực	Thuế - Phí - Lệ Phí, Xuất nhập khẩu
Tình trạng hiệu lực	Hết hiệu lực 01/10/2012
Cập nhật	7 năm trước
Yêu cầu cập nhật văn bản này

Download Văn bản pháp luật 04/2009/TT-BKH

DOC

File văn bản word (1.2MB)

Lược đồ Circular No. 04/2009/TT-BKH of July 23, 2009, guiding the implementation of some

Văn bản bị sửa đổi, bổ sung

Văn bản liên quan ngôn ngữ

Thông tư 04/2009/TT-BKH hướng dẫn thuế nhập khẩu, giá trị gia tăng

Văn bản sửa đổi, bổ sung

Văn bản bị đính chính

Văn bản được hướng dẫn

Văn bản đính chính

Văn bản bị thay thế

827/2006/QD-BKH

Văn bản hiện thời

Circular No. 04/2009/TT-BKH of July 23, 2009, guiding the implementation of some
Loại văn bản	Thông tư
Số hiệu	04/2009/TT-BKH
Cơ quan ban hành	Bộ Kế hoạch và Đầu tư
Người ký	Trương Văn Đoan
Ngày ban hành	23/07/2009
Ngày hiệu lực	27/08/2009
Ngày công báo	...
Số công báo
Lĩnh vực	Thuế - Phí - Lệ Phí, Xuất nhập khẩu
Tình trạng hiệu lực	Hết hiệu lực 01/10/2012
Cập nhật	7 năm trước

Văn bản thay thế

Circular No. 04/2012/TT-BKH promulgating a list of equipment, machinery spare

Văn bản được dẫn chiếu

Văn bản hướng dẫn

Văn bản được hợp nhất

Văn bản được căn cứ

Văn bản hợp nhất

Nội dung Lược đồ Lịch sử VB liên quan

Văn bản gốc Circular No. 04/2009/TT-BKH of July 23, 2009, guiding the implementation of some

Lịch sử hiệu lực Circular No. 04/2009/TT-BKH of July 23, 2009, guiding the implementation of some

23/07/2009
Văn bản được ban hành
Trạng thái: Chưa có hiệu lực
27/08/2009
Văn bản có hiệu lực
Trạng thái: Có hiệu lực
01/10/2012
Được thay thế
Được thay thế bởi Circular No. 04/2012/TT-BKH promulgating a list of equipment, machinery spare

Thông tư 04/2009/TT-BKH

Circular No. 04/2009/TT-BKH of July 23, 2009, guiding the implementation of some provisions on import tax and value-added tax

Nội dung toàn văn Circular No. 04/2009/TT-BKH of July 23, 2009, guiding the implementation of some

Thuộc tính Văn bản pháp luật 04/2009/TT-BKH

Download Văn bản pháp luật 04/2009/TT-BKH

Lược đồ Circular No. 04/2009/TT-BKH of July 23, 2009, guiding the implementation of some

Văn bản bị sửa đổi, bổ sung

Văn bản liên quan ngôn ngữ

Văn bản sửa đổi, bổ sung

Văn bản bị đính chính

Văn bản được hướng dẫn

Văn bản đính chính

Văn bản bị thay thế

Văn bản hiện thời

Văn bản thay thế

Văn bản được dẫn chiếu

Văn bản hướng dẫn

Văn bản được hợp nhất

Văn bản được căn cứ

Văn bản hợp nhất

Văn bản liên quan Circular No. 04/2009/TT-BKH of July 23, 2009, guiding the implementation of some

Nghị định 149/2005/ND-CP

Quyết định 827/2006/QD-BKH

Nghị định 116/2008/ND-CP

Nghị định 123/2008/ND-CP

Thông tư 04/2009/TT-BKH

Thông tư 04/2012/TT-BKH

Văn bản gốc Circular No. 04/2009/TT-BKH of July 23, 2009, guiding the implementation of some

Lịch sử hiệu lực Circular No. 04/2009/TT-BKH of July 23, 2009, guiding the implementation of some